Maxam 3300

The Maxam 3300IV is an amazingly compact mower for a 3.3m cutting width, which makes it easy and safe to operate even in undulating terrain.

The beauty of the MAXAM 3300IV is that you can knock out the topping jobs in unbelievably short time which is so important on busy dairy farms. Too often the toppings jobs are left to another day so the fresh regrowth is not as quick. The 3300IV high speed cutting blades leave the grass cleanly cut, and the fully spread toppings decompose quickly, enriching the soil. The cutting height can be fine tuned to suit the required DM/Ha, which will change throughout a normal season. Post Grazing residual height of the pasture is critical to its recovery and the Maxam mower has a mixture of blade heights and topping skids to pick from. The Maxam mower range is therefore an important part of a farmers pasture management system.

Another key part of the Maxam 3300IV mower success is the way the four skids under the cutting drums stop any scalping – even when cutting low to the ground. Traditional toppers bridge across their outside skids, especially if the cutting width is over about 1.5m. Mostly the cutting height must be adjusted up until this does not happen and this is commonly about 75 to 100mm which is too high for effective results.

Disc mowers are used for topping and whilst they don’t scalp, they tend to overheat as there isn’t enough grass flowing over the bar to provide effective cooling. They are also much more complex and need regular servicing. Being out the side of the tractor makes them more susceptible to hitting fences, troughs and other damage.



Cutting Width

3.3 m (10’10”)

Overall Transport

3.18 m (10’5”)

Height Adjustment

25-75 mm* (see options)

PTO Speed

1000 rpm input

Tractor Size

90 HP +



Drive Shaft
6 or 21 spline with over-run clutch
MBLR Red stepped
MBLB Blue half step
MBLS Straight